GS501Z Balboa Control System With MVP260 Touch Pad

  
We've got major parts like pumps, heaters control systems & spare parts such as switches, cables, sensors & lights. GS501Z Balboa Control System With MVP260 Touch Pad. This system consists of a GS501Z control box with fitted M7 Heater (3kW Heater), a MVP260 control Panel. Used to retrofit / upgrade any 1 pump hot tub systems that also needs an air blower. Designed to connect and manage: 1 main dual speed pump and a single speed pumps and a circulation pump if required, an air blower, ozone, light and media (TV or Radio). The Heater tube is 15" long and connects to 2" plumbing, seals and spare unions included. The MVP260 panel has a factory fitted cable and includes 3m sticky on the rear to fit, face dimensions are 17.8cm x 5.4cm. Please note the control panel comes with a cable attached but this bundle is just the control panel and control box, you may need different connections to attach your pumps and parts to this control box.

Balboa control systems now use AMP connections directly on to the board, see related products for cables and connections, you will need 1 per pump or part that connects to the board. For fitting instructions, please see the downloadable PDF manual on the manuals tab above. This system is made of M7 Technology which is a Balboa twin sensor control system, this means you don't need to drill a hole for a temperature thermostat, their is no pressure switch or high limit sensor, the system works by sensing the difference between the two thermostats, pre heater is the current temperature post heater is the hi limit and if both sensors are the same the element is working.

The M7 systems are great for upgrades on hot tubs because their so easy to fit into a system, this also applies if your building a hot tub from new. Hot Tub DIY are one of Britain's fastest growing suppliers of hot tub parts, accessories and chemicals, for demostic, commercial and diy builders. We operate from Cornwall, where we keep basic stock levels of chemicals, filters and smaller parts and send our larger parts directly from ouyr importers based in Cornwall and Portsmouth.

We want to ensure that your order is delivered quickly and safely so we have given careful consideration to the carriers we use to fulfil them. Our chosen partner is APC Overnight.

This website is operated by Hot Tub DIY owned by Hot Tub Help Limited (referred to as "Hot Tub DIY/we/our/us"). We are Hot Tub Help Ltd, a company registered in England with registration number 07393517. Our registered address is Beth an May, East Hill, Tuckingmill, Cornwall TR14 8NQ. When you (the person named on the order) place an order with us, we will do business with you under the following terms. General 1.1 We reserve the right to change these terms and conditions at any time. Any such changes will take effect when posted on the website (see date at the top) and it is your responsibility to read the terms and conditions on each occasion you use this website and your continued use of the website shall signify your acceptance to be bound by the latest terms and conditions. 1.2 If you are not a consumer, you confirm that you have authority to bind any business on whose behalf you use this website 1.3 Certain website services will require registration and subsequent access to those services will be subject to an approved login name and password ("Password Details"). Information that you provide on this website must be accurate and complete. All Passwords Details are accepted and may be withdrawn at our sole discretion and are exclusive to you and non-transferable and must be treated as strictly confidential at all times.

In the event that you have any concerns regarding your Password Details or become aware of any misuse then you must inform us immediately (see Help for more information and full contact details). S help pages for information on how to place an order.

All orders that you place on this website will be subject to acceptance in accordance with these terms and conditions. 2.2 The'confirmation' stage sets out the final details of your order. 2.4 We do not file details of your order for you to subsequently access direct on this website, and therefore, please print out these terms and conditions and the order acknowledgement for your own records. Goods are subject to availability. In the event that we are unable to supply the goods, we will inform you of this as soon as possible.

Hot Tub DIY is not responsible for the content of external websites. By accepting these terms and conditions you consent to such checks being made. In performing these checks personal information provided by you may be disclosed to a registered Credit Reference Agency which may keep a record of that information. All information provided by you will be treated securely and strictly in accordance with relevant data protection laws.

3.3 Online price errors. If we discover an error in the price of goods ordered or reserved, we will inform you as soon as possible e. Prior to the goods being despatched or in store prior to the collection of the goods.

We will provide you the option of reconfirming your order at the correct price or cancelling it. If we are unable to contact you we will treat the order as cancelled. We are part of Hot Tub Help Limited and our shared VAT number is GB 97 31 31 23 1. We make every effort to deliver goods within the estimated timescales, however delays are occasionally inevitable due to unforeseen factors. Hot Tub DIY shall be under no liability for any delay or failure to deliver the products within estimated timescales. 4.2 We will deliver your order to any address in the UK. We will confirm this with you at the time you place your order. 4.3 Risk of loss and damage of products passes to you on the date when the products are delivered to you or are left with a person or place nominated by you. 4.4 Unless we have your written authorisation, we will always need an authorised signature when delivering goods to you. 4.5 We aim to keep enough stock so that we never run out.

However, at times when there is unexpectedly high demand, we may unfortunately run out. If this happens, we may delay sending out your order for a couple of days while we get new stock, we will let you know about our progress. Your rights, defined in the Consumer Rights Act 2015, are not affected by these terms. 5.4 We are constantly updating our products, prices and offers. We are confident of our technology and staff but we realise that we sometimes may make mistakes.

If we offer goods for sale incorrectly, we will always try to honour our offer. There may be rare circumstances where it is not possible for us to do this. In these cases, we will contact you and explain the situation.

5.5 If things like strikes, wars, acts of terrorism or even small things like power cuts interfere with our business with you, we will do our best to keep things going. However, we will not be legally responsible to you for any failure which is due to these unexpected circumstances or any other situation outside our control.

5.6 All sizes and measurements are approximate but we do try to make sure that they are as accurate as possible. Legal responsibility 6.1 Nothing in these terms of business should affect your legal rights or limit our legal responsibility for death, personal injury or fraudulent misrepresentation resulting from our negligence, or any other liability which we cannot limit or exclude by law. This includes our legal responsibility under section 2(3) of the Consumer Protection Act 1987.

We will not be legally responsible to you for any losses which both we and you could not expect at the time you bought the goods. If you are a trade customer, we will not be legally responsible to you for any business losses.

6.2 These terms of business will be governed by English law. Any disputes will be dealt with by the English courts. Liability and Indemnity 7.1 Nothing in these terms and conditions excludes or limits liability for death or personal injury caused by negligence, fraudulent misrepresentation, or any other liability which may not otherwise be limited or excluded under applicable law.

7.3 Subject to Section 7.1 above, other than as expressly provided in these terms and conditions with respect to specific products and except for the exclusive remedies set out at Section 5 above, any indemnities, warranties, terms and conditions (whether express or implied) are hereby excluded to the fullest extent permitted under applicable law. 7.4 Subject to Section 7.1 above, Hot Tub DIY will not be liable, in contract, tort (including, without limitation, negligence), pre-contract or other representations (other than fraudulent on negligent misrepresentations) or otherwise out of or in connection with the terms and conditions for any: economic losses (including without limitation loss of revenues, data, profits, contracts, business or anticipated savings); or loss of goodwill or reputation; or loss of privacy and loss of data; or special or indirect losses suffered or incurred by that party arising out of or in connection with the provisions of any matter under these terms and conditions.

7.5 Notwithstanding the above, subject to Section 7.1 Hot Tub DIY's aggregate liability (whether in contract, tort or otherwise) for loss or damage shall in any event be limited to a sum equal to the amount paid or payable by you for the product(s) in respect of one incident or series of incidents attributable to the same clause. 7.6 This clause 7 does not affect your statutory rights as a consumer, nor does it affect your contract cancellation rights. Miscellaneous Provisions 8.1 The contract between us shall be governed by the laws of England and any dispute between us will be resolved exclusively in the courts of England.

English is the only language offered for the conclusion of the contract. 8.2 Our maximum liability to business users arising out of or in connection with the products shall be limited to the replacement value of the product in question (except in the case of death or personal injury caused by our negligence or in respect of fraud). 8.3 Hot Tub DIY shall be under no liability for any delay or failure to deliver products or otherwise perform any obligation as specified in these terms and conditions if the same is wholly or partly caused whether directly or indirectly by circumstances beyond its reasonable control. 8.4 You may not assign or sub-contract any of your rights or obligations under these terms and conditions or any related order for products to any third party unless agreed upon in writing by Hot Tub DIY.

8.5 Hot Tub DIY reserves the right to transfer, assign, novate or sub-contract the benefit of the whole or part of any of its rights or obligations under these terms and conditions or any related contract to any third party. 8.6 If any portion of these terms and conditions is held by any competent authority to be invalid or unenforceable in whole or in part, the validity or enforceability of the other sections of these terms and conditions shall not be affected. 8.7 These terms and conditions do not create or confer any rights or benefits enforceable by any person that is not a party within the meaning of the U. Contracts (Rights of Third Parties) Act 1999 except: a Travis Perkins (as defined below) shall have the right to enforce any rights or benefits under these terms and conditions; b Travis Perkins shall have the right to enforce and take the benefit of the rights or benefits of any limitation or exclusion or limitation of liability in these terms and conditions; c a person who is a permitted successor or assignee under Section 8.7 above of the rights or benefits of these terms and conditions may enforce such rights or benefits. D No consent from the persons referred to in Section 8.8 is required for the parties to vary or rescind these terms and conditions (whether or not in any way that varies or extinguishes rights or benefits in favour of such third parties). 8.8 No delay or failure by Hot Tub DIY to exercise any powers, rights or remedies under these terms and conditions will operate as a waiver of them nor will any single or partial exercise of any such powers, rights or remedies preclude any other or further exercise of them. Any waiver to be effective must be in writing and signed by an authorised representative of Hot Tub DIY. 8.9 These terms and conditions including the documents or other sources referred to in these terms and conditions supersede all prior representations understandings and agreements between you and Hot Tub DIY relating to the use of this website (including the order of products) and sets forth the entire agreement and understanding between you and Hot Tub DIY for your use of this website. Please note that this applies to the individual product price only. This is not a full list of non matched promotions and is for indicative purposes only. This policy has all the information you? Ll need to understand when and how you can do this. Certain products will be exempt from the'Change of Mind' clause, these include goods that are cut, mixed or made to your requirements. Please wait for us to accept your Return Request BEFORE returning your product.

My item has been damaged in transit We do our utmost to ensure our items are carefully packed and protected, however, sometimes damage can occur in transit. Once you have received your item, please ensure you check it for any damage straight away.

Any damage reported after this period will not be considered as transit damage. My item is faulty We are confident in the products that we sell, should a fault occur please see our policy, which is in addition to your legal rights.

HINT: Always make sure you insure the item you are returning. In the event of transit damage, we will not be able to make any repairs and you will need to claim the cost of the item from the courier. If you are returning an item, we would recommend taking photos of the item before you pack and send it. This will act as evidence of condition before transit should you need to make a claim against the courier.

Balboa GL2001 ML700 Complete Control System Runs 4 Pumps Hot Tub DIY Upgrade. Balboa GS523DZ VL802D Complete Control System and Panel Hot Tub DIY Upgrade. GS500Z 3kW Balboa Control System With Mini Touch Pad - Complete includes Heater. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

This item is in the category "Garden & Patio\Swimming Pools, Saunas & Hot Tubs\Hot Tub Parts". The seller is "hottubdiy" and is located in this country: GB.

This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Republic of, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, Korea, South, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, French Guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi Arabia, South Africa, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and Tobago, Uruguay, Vietnam.

• Brand: Balboa
• MPN: PK-50142
• Manufacturer Part Number: PK-50142
• Item Height: 27
• Item Width: 12
• Item Length: 50
• Plumbing Size (Inch's): 2
• Includes: All Cables
• Pump 1: Single or dual speed Pump
• Pump 2: No Connection
• Pump 3: No Connection
• Circulation Pump: Ready
• Air Blower: Ready
• Heater: 3kw M7
• Light option: 12 Volt
• Ozone: Ready
• Topside Controller Included: MVP260
• Radio TV/AV: Ready
• Type: Circuit Board