GSE Controller De & Humidifier, Step control Temp & Temp+Humidity & SMS Alarm

  
GSE Controller - De & Humidifier, Step control Temp & Temp+Humidity & SMS Alarm. GSE Controller - Dehumidifier & Humidifier The humidifier regulator serves rooms under constant humidity to keep their humidity stable. The unit is interposed between a humidification (fogger) or dehumidifier unit and a wall outlet. There are two control button to set the desired humidity and the consumer-type choosing the hysteresis.

The controller is supplied as a unit and is ready for use. The unit comes complete in a waterproof holding, with compatible mains sockets with hinged lids and a digital low voltage sensor, making it the perfect controller for humid rooms. The sensor is supplied with a 4-meter cable.

Sizes and technical data: Housing: WxHxD = 130x80x70mm Humidity Controller: WxHxD = 160x100x90mm Power requirements: (Mains) Voltage: 230V/50Hz, 15Amp Digital Sensor: 5V Measures temperatures from -55 ° C to +125 ° C (-67 ° F to +257 ° F) 0.5 ° C accuracy from -10 ° c to +85 ° C Humidity accuracy ± 4.5% RH Protection class: IP54. Settings range: Humidity: 30% to 100% Hysteresis:dehumidifier -10% to -1% and humidifier +1% to +10%. GSE Step control Temperature 2.5amp & 8 amp (1 fan) The step transformer controller have the special characteristic that the ventilators make no noise "hum" in the lower rotation. The step transformer control the fan speed from self 6-step up/down according the temperature. Temperature as Hysteresis (sensitivity) can be set on two knob's.

The controller comes as a finished part and is ready to use. This reliable fan controller comes complete with a sealed water resistant cover, plugs with flap-lids and a low voltage sensor making it perfect for humid rooms.

The sensor comes with a 4meter long cable and can be extended up to 50meters. 2.5amp Specifcation Case: WxHxD = 200x250x180mm Controller: WxHxD = 265x300x205mm Designed for: 2,5A / 600W Volts: 230V / 50HZ Digital sensor 5V Measures temperatures from -55°C to +125°C (-67°F to +257°F) 0.5°C accuracy from -10°C to +85°C Protection class: IP54. 8amp Specifcation Sizes and technical data's: Case: WxHxD = 200x250x180mm Controller: WxHxD = 265x300x205mm Designed for: 8A / 1800W Volts: 230V / 50HZ Digital sensor 5V Measures temperatures from -55°C to +125°C (-67°F to +257°F) 0.5°C accuracy from -10°C to +85°C Protection class: IP54.

Settings range: Temperature: 20C° - 30C° Temperature hysteresis: 2-8C°. GSE Step control Temperature & Humidity 2.5amp & 8 amp (2 fan) he step transformer controller have the special characteristic that the ventilators make no noise "hum" in the lower rotation. The step transformer control the fan speed from self 6-step up/down according the humidity and temperature.

Temperature and hysteresis (sensitivity) can be set on two knob's as well humidity and humidity-hysteresis on the other two knobs. The intake fan runs 1step behind the exhaust fan to prevent odour from escaping. Sample: Exhaust fan runs on step1, intake fan runs on step0 (stop), when the exhaust fan switch to step2 the intake fan switch to step1 etc... Until the exhaust fan reach the max.

Step6 the intake fan will run on step5. The sensor comes with a 4meter long cable. Sizes and technical data's of 2.5 amp Case: WxHxD = 200x250x180mm Controller: WxHxD = 265x300x205mm Designed for: 2,5A (for 2fans) Volts prim: 230V / 50HZ Volts sec. 80V, 110V, 140V, 170V, 200V, 230V automatic-steps 50HZ Digital sensor 5V Measures temperatures from -55°C to +125°C (-67°F to +257°F) 0.5°C accuracy from -10°C to +85°C humidity accuracy ±4.5%rh Protection class IP54. Sizes and technical data's 8amp Case: WxHxD = 200x250x180mm Controller: WxHxD = 265x300x205mm Designed for: 8A (for 2fans) Volts prim: 230V / 50HZ Volts sec.

Settings range: Temperature: 20C° - 30C° Temperature hysteresis: 2-8C° Humidity: 30% - 100% Humidity hysteresis: 6%-30%. The SMS alarm controller is an easy-to-use standalone alarm system with alarm output via SMS. The SMS alarm controller provides ten independent input / output ports. By virtue of its many sensors and its individual terminal assignment, the SMS alarm controller meets all requirements.

Alarm via SMS Smoke detector Motion detector Water sensor Temperature / humidity monitoring Magnetic RED contacts (for windows, doors, etc) Power failure External alarm system Gas detector Glass break detector Alarm siren acoustic and light. Data transmission security adjustable from normal to encoded SMS control of up to ten 230 V multi-socket outlets Minimum and maximum temperature and air humidity adjustable via SMS. 180 seconds before alarm is armed Sizes and technical data's: Power adapter: 100 - 240 V / 50 - 60 Hz Supply voltage: 12 VDC +/- 10 % Supply current: Min. 1A Temperature range: -10 °C to 50 °C Humidity range: 0 % to 95 % GSM frequencies: 850 / 900 / 1800 / 1900 MHz Dimensions (L x W x H): 80 x 140 x 78 mm. EVERYTHING WE SEND OUT IS IN PLAIN PACKAGING..

Alternatively you are more than welcome to collect your order from our premises in cambridge and browse our shop which stocks over 1000 products. Items less than 2kg in weight can be sent throughout the UK and N. Offshore British mainland please message for a quote. And if you are unsure about the weight of your order please message first for a quote.

Welcome to CamGrow's online Hydroponics and Horticultural Superstore. We have thousands of products for all your hydroponic and horticultural needs available in our Cambridge shop and are busy adding them to this website.

It is in original undamaged packaging with all tags intact. The product is in the same condition as how you received it. You have a statutory duty to take reasonable care of our goods whilst they are in your possession and during transit. We are always more than happy to help with any questions you may have!