Controller Control System

HEATMISER Wiring Centre Hot Water Underfloor Heating System UH4/UH6/UH8/UH8-RF

HEATMISER Wiring Centre Hot Water Underfloor Heating System UH4/UH6/UH8/UH8-RF

HEATMISER Wiring Centre Hot Water Underfloor Heating System UH4/UH6/UH8/UH8-RF   HEATMISER Wiring Centre Hot Water Underfloor Heating System UH4/UH6/UH8/UH8-RF

HEATMISER Wiring Centre - Hot Water Underfloor Heating System UH4 / UH6 / UH8 / UH8-RF. Heatmiser UH4 - 4 Zone Underfloor Heating Wiring Centre. The Heatmiser UH4 can be used in conjunction with our mains voltage thermostats.

The UH4 is also ideally suited for underfloor heating but can also control a single zone of radiators. The UH4 provides central switching of up to 4 zone actuators.

Output for a hot water cylinder and the system boiler and pump. Datasheet - file:///C:/Users/info/Downloads/UH4-Datasheet.

(copy and paste link address into search engine bar). Manual Download - file:///C:/Users/info/Downloads/UH4-Manual. Heatmiser UH6 - 6 Zone Compact 230v Wiring Centre.

The Heatmiser UH6 is our 6 Zone underfloor heating wiring centre designed to work with our 230v Thermostats. The UH6 wiring centre provides central switching and is therefore ideally situated next to the underfloor heating manifold. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. Heat & UFH Pump Delay - When there's a demand it is possible to set a timed delay, before activating the Pump & Heat outputs. Creepage Function - During hot weather the heating may not be required as often, which means after long periods of the UFH pump not being used, the pump can seize and refuse to operate. To prevent this, it is good practice to operate the pump once a day, the creepage function does this for you.

Once enabled the UH6 wiring centre will operate the pump for 1 minute, only if the outputs have not been operated by a thermostat, within the preceding 24 hours. This function does not operate the HEAT output. Up to 4 actuators can be connected to each zone. Central wiring for up to 6 zones. DIN Rail Mounting Option (DIN Rail not included).

Output for underfloor heating valve and pump activated when any thermostat calls for heat. Datasheet Download - file:///C:/Users/info/Downloads/Heatmiser-UH6-Datasheet. Manual Download - file:///C:/Users/info/Downloads/UH6-Manual. Heatmiser UH6 - 8 Zone 230v Underfloor Heating Wiring Centre.

The Heatmiser UH8 underfloor heating wiring centre is designed to work with our 4 channel 230v time clock (TM4) and 230v Set back thermostat (DS-SB) but equally could be used with any 230v room thermostat. Up to 8 zones can be controlled from the UH8. On board the UH8 are two heating time channels, each zone allows you to specify which time channel it should follow. 2 additional time channel connections are provided for hot water control or other auxiliary devices. On demand from any zone, a 230v output is provided to switch the relevant zone actuator, underfloor heating pump and valve.

A simple slide switch makes zone 8 suitable for controlling a radiator zone. When used for controlling radiators, zone 8 does not enable the underfloor heating pump, valve and boiler. Datasheet Download - file:///C:/Users/info/Downloads/UH8-Datasheet.

Manual Download - file:///C:/Users/info/Downloads/UH8-Manual. Heatmiser UH8-RF - 8 Zone Wireless Wiring Centre. The Heatmiser UH8-RF is our 8 Zone wireless wiring centre designed to work with our Slimline-RF and neoAir Thermostats.

The UH8-RF provides central switching and is therefore ideally situated next to the underfloor heating manifold. 8 zones can be controlled as well as providing an output for a hot water cylinder. The boiler signal can also be sent via RF to the RF Switch, providing the installer a totally wireless solution.

Up to 6 actuators can be connected to each zone. An external aerial is available for use when the UH8-RF is being mounted in a metal cupboard or when the wireless signal is restricted. A software option in the thermostat allows you to configure which zones are underfloor heating and which zones are radiators.

Radiator zones will not enable the underfloor heating pump, valve and boiler when there is a call for heat. Radiator zones should enable the boiler from the end switch of the valve. Central wiring for up to 8 zones. Wireless Boiler Link (RF Switch Optional).

Works with our Slimline-RF and neoAir. Output for multiple radiator zones. Output for domestic hot water. Datasheet Download - file:///C:/Users/info/Downloads/UH8-RF-Datasheet. Manual Download - file:///C:/Users/info/Downloads/UH8-RF-Manual.

Orders placed on Saturday or Sunday will be sent on Monday. We normally will reply within 24hr of a message being received. Our contact number is 01702 557771. Should your item be defective we will replace the item/part upon its return.

Suitable packaging and care must be used to return the item. This item is in the category "Home, Furniture & DIY\Heating, Cooling & Air\Heaters & Radiators\Underfloor Heating Systems". The seller is "eesystems" and is located in this country: GB.

This item can be shipped to United Kingdom.

  • Product Name: UH8-RF - upto 8 zones wireless
  • Colour: White
  • Custom Bundle: No
  • Type: Heating Control
  • Brand: Heatmiser
  • Part Type: Wiring Centre
  • Modified Item: No


HEATMISER Wiring Centre Hot Water Underfloor Heating System UH4/UH6/UH8/UH8-RF   HEATMISER Wiring Centre Hot Water Underfloor Heating System UH4/UH6/UH8/UH8-RF