Hidden Dog Containment System Electric Training Boundary Control Fence Collar

  

This electronic wireless pet fencing system is one of the most reliable, cost-efficient pet containment systems available today. Easy-to-install, rechargeable system is great for any size dog. This wireless pet fence system uses a constant radio signal to create a "stay zone". The receiver collar worn on your dog picks up the signal.

If your dog ventures out of the "safe zone", which is very rare once he is properly trained, he will hear a warning tone followed by a light static correction which startles your dog but is completely safe and humane. TWO modes are available: ELECTRIC SHOCK and SOUND CONTROL, with a range of up-to 5000 square meters. Dog wireless fencing system with Completely Wireless System & Super Large Controllable Range:take the transmitter as center, it's biggest remote-control semidiameter is 500 meters. The signal intensity of transmitter can be adjusted from 0 to 100 levels, and the correspondent distance of receiver should be 20-500 meters. If your dog runs out from designated place, its receiver will initiate training function automatically.

Firstly, your dog will be warmed by SOUND, then it will be shocked by STATIC ELECTRICITY to go back to the safe place. 1 rechargeable waterproof receivers with soft durable straps allow you to train ONE dog.

Transmitter is equipped with digital display device, which shows current signal intensity directly (0-100 levels). Signal field is a circular boundary. Waterproof & Rechargeable Collar Receiver. A Water-resistant collar fits dog neck sizes 8 to 21 inches(20.32 cm - 53.34cm).

Transmitter: 14.88.53.2cm. Receiver: 6.53.93.2cm. 1 x Indoor wall-mounted Transmitter.

1 x Rechargeable and Waterproof Collars. 1 x 110-240V Power Adapter. 1 x English User Manual. 4 x Probes (2 short & 2 long). 2 x Rechargeable and Waterproof Collars.

How to Set up the fence system. Power on/off the transmitter, by press and hold ON / OFF button for 3 seconds. Press the button "+" or"-" for adjustment of transmitting power level, which will changes remote control range of this system, Press button "+" to increase the power level, the Max. Value is level 100, which the Max control range is 500 meters. Button"-" for level decreasing, the Min. The setting value will be displayed on screen. Make sure the transmitter is on, then press on/off button shortly to enter coding status. The screen will display "1dp" with flashing. The transmitter must be powered by AC adapter, which the output is 5V/1A. Set up the Receiver Collar. Assemble the 2 probes in the screws, which is at the bottom of receiver. Notice: 2 short probes are suitable for small dogs, and 2 long probes for medium or big dogs. Then, make the strap across back and both holes of receiver, to fix strap on the receiver with proper tightness. Below table will show you the size and weight of your dogs.

Keep pressing the button "ON/OFF" for 3 seconds to turn it on. And it indicate with "Bi-Bi" sound and LED flashing once. Press on/off button shortly to enter coding status, once the transmitter is on. Please charge it when the red LED is flashing, it means low battery.

The charger is common with that of transmitter. When it is fully charged, the LED will change to blue. The receiver Collar is rechargeable and waterproof. For using it at first time, please charge it at least 4 hours. How to Training your dog.

Coding between transmitter and receiver. Make sure transmitter and receiver are close and power on. Shortly press "on/off' button of both devices to enter coding status, the screen will display "1dp with flashing.

The coding is successful while the receiver sounds "Bi-Bi" and blue LED flashes one time. Put the receiver collar on the neck of your dog, and check the tightness is proper. Power on transmitter and set the power level to proper value by pressing "+/- " button on the transmitter. The value will display on the screen. The power level is higher and the remote control range is wider, blew table show you the relationship.

Notice: The remote control distance is measured in pen area, it will be affected by electromagnetic waves or obstacle around the fence system, and the distance will be reduced slightly. Place the transmitter is more than l.

5 meters from ground, and there is no any metal wall around it. Notice: the system could support multi- receivers, you can get another receiver and code it with the same transmitter according to step 1. Please use AC adapter same one as Transmitter adapter to charge the collar.

How does the fence system work. The system will start up while your dog is running beyond the setting distance, the receiver collar in your dog neck will issue warning signal by "Bi-Bi" sounds and static shock, so as to remind or prevent your dog moving on.

In work status, the red LED will flash ever3t 2 seconds. If the receiver is out of setting range from transmitter, it will sound'Bi-Bi 3 times firstly, and then start up static shock and increasing intensity from level l to level 4. It will automatically go into sleeping and power-saving mode, when the receiver is standby and no any moving for more than one minute. Once the receiver is moving, it w. How to Verify the Function.

To verify the function of warning sound and static shock to be start up properly, please operate it as below steps. Make sure both transmitter and receiver in work status, and set the power level for transmitter accordingly. Place the receiver beyond the remote control distance that you set just now. You should listen "Bi-Bi " sounds from receiver immediately. Otherwise, the function of warning sounds is improper.

Place the testing LED light on probes of receiver before the third warning sound be received, and then LED will be turned with gradual brightness. Otherwise, the function of static shock is improper. The wireless fence system is intended to use for dogs only. Alow battery may cause intermittent operation.

Do not use it and charge it immediately for a low battery. DO NOT leave the collar on your dog for more than 10 hours per day. Keep the receiver collar away from children. Read all instructions before using this product.

Collar receiver is working properly. Also, testing the system will verify the field width setting is correct.

Q1:For KD-661 dog training device, Could we adjust the current? Could the KD-661adjust the intensity? Does this system could use for 30KG dog? A:As long as the dog is out of range, the intensity of current will gradually rise automatically, It can't be manually adjusted. This system could adjust the range, can not adjust the intensity.

This system can be used for 30kg dog. Q2: The receiver's indicator has 3 colors, red, blue, there is a not particularly red color, what does it mean? A:When you turn on, it shows red light ;when full charged, it shows blue light ;when charging, the red light and blue light will appear together, it feels like a pink light, but it is just a moment, and then immediately restore a color of the lamp, that is red, full of electricity will only be a color of the lamp, blue light. Q3: The signal is unstable? Q4: Launcher couldn't Turn on, what is the reason?

A: If the power light is not bright, the power is not plugged in, if the power light (red light) is on, please long press the power button to boot, if you can not turn on, please press the reset switch and then boot. Q5: Take the emitter as the criterion and more than a set distance will work. A:the working principle of the wireless fence, The transmitter transmits the signal (the signal area is the safe area of the pet activity), and the receiver receives the signal. When the receiver can not receive the signal (the transmitter is not powered on or the receiver is out of the signal range), the receiver activates the sound + shock remind function. Q6: KD-661: The batteries couldn't rechargeable?

The manual says that they have to charge four hours at the beginning, we have charged four hours. However, when the plug was unplugged for a few minutes, it was devoid of electricity.

We charging for a while, the red light flashes, but after unplugging, after a while no electricity? A:When the power is plugged in, is the red light of the receiver bright? Does the blue light be bright after full charged? Red light flash is in working condition, after the boot, the red light flash once in 2 seconds is in working condition, only the red light flash (1 second flash 2) is the lack of electricity.

Q7: The receiver's battery problems There is a signal instability problem, the battery 5 minutes no electricityThe battery has no electricity for 5 minutes. A: 1 Confirm that is it not fully charged, 2 Is it safe to enter the safe zone, so there is no electric shock or sound out 3 Is it beyond the limits of 3 cycles, the receiver automatically shut down.

Q8:What is the principle of the fence to sense? A: 660: Low frequency 661: Radio frequency (RF) wireless signal transmission. Q9:when the dog is out of the set range, why is the receiver just sound, but not shocking? A: When dog out of range, the electric shock is intermittent, a period of only 18 seconds as the user manual description, maybe we couldn't feel the dog's reaction, Or because we tied the collar too loose with the dog, the shock did not touch the dog's body, dog couldn't feel the electric shock. Q10: After reading the manual, still don't know how to set up the system, collar couldn't be connected with interference?

A: The receiver is within the set range, the receiver is in standby mode, will not sound and shock, only red light flash for 2 seconds flashes once in 2 seconds, once the receiver out of range or transmitter signal is severed and strong interference coverage The receiver will sound a warning and a shock. According to the feedback information, the receiver randomly emits sound, there are only two possibilities: 1 the receiver is at the edge position. 2 use of the place of interference!

Appropriate increase stalls to solve this problem. Q11:Two emitters Could Be used together to set up a larger electronic fence? A: No, a receiver can only be paired with a transmitter. Q12: The manual says that low battery will flash, normal state will flash once every two seconds, how to understand that?

A:Low power is quick flash, which is different from the frequency of the normal flash. The receiver is quick flash red light at low power, flash twice a second. The charging process is a long red light, full of lantern long bright, the receiver is flashing fast display no electricity, you need to charge. Standby or work will be flashing (slow flash). Q13: The hilly location area is not suitable for using this product, right?

A:Because the environment prevents the signal transmission, The hilly position will feel that the pre-set distance is different with the actual distance. In this environment, we must properly adjust the gear, increase the launch power, When the signal is interrupted instantly, the receiver couldn't receive the signal, it will start to work beyond the range, it will work well after the interference. How to training your dogs. Shortly press "on/off" button of both devices to enter coding status, the screen will display "1dp" with flashing. Put the receiver collar receiver on the neck of your dog, and check the tightness is proper.

The power level is higher and the remote control range is wider, below table show you the approximate relationship. Place the transmitter is more than 1.5 meters from ground, and there is no any metal wall around it. This item is in the category "Pet Supplies\Dog Supplies\Training & Obedience\Other Training & Obedience". The seller is "trieseller" and is located in this country: GB. This item can be shipped to United Kingdom.

• Package: A=2 Dog System
• Brand: Unbranded
• Type: Wireless Transmitter
• Model: KD661
• Material: ABS
• Style: Wireless
• Dog Size: M
• Gender: Unisex
• Colour: White
• Feature: Rechargeable & Waterproof