Controller Control System

High efficiency 40A MPPT solar charge controller for 12V/ 24V systems up to 150V

High efficiency 40A MPPT solar charge controller for 12V/ 24V systems up to 150V

High efficiency 40A MPPT solar charge controller for 12V/ 24V systems up to 150V   High efficiency 40A MPPT solar charge controller for 12V/ 24V systems up to 150V
The UK solar power specialist Photonic Universe Ltd is proud to offer this high efficiency 40A MPPT solar charge controller / regulator for charging 12V or 24V batteries by solar panels with power 520W (with a 12V battery) / 1040W (with a 24V battery) and voltage up to 150V. No-quibble 30 days return period. Free lifetime technical product support. Deep industry expertise and knowledge. This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature.

This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with high voltage or multiple panels with voltage up to 150V. The maximum combined input solar power allowed for this controller is 520W for 12V battery system or 1040W for 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage e.

Charging a 12V battery with a 36V solar panel. This charge controller features a comprehensive set of electronic protection functions to ensure the maximum possible efficiency of your solar system. These include: reverse current prevention at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, solar panel over voltage, over load, short circuit and reverse polarity protection. The controller also has self-diagnostic capability and highlights any system errors using advanced fault-targeting technology.

There is an optional audible alarm to alert the user of system failures. The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel). LED lights indicate the charging status and battery condition.

Current limiting function (40A) allows the possibility of adding more solar panels to your solar system in the future. Die-cast aluminium design ensures excellent heat dissipation.

1 The controller can be connected to a remote meter MT50 with an LCD screen. Which displays system performance information, and allows the user to manually adjust parameters and load settings. 2 The controller can be connected to a Wi-Fi module. 3 An RJ45 to USB cable.

Can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only). Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the'load' settings e. Set timers for lighting, fans, pumps and more. In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor.

Which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. The most advanced MPPT technology to ensure high efficiency (>95%) of your solar system. Fully automated operation and auto 12/24V selection. 3 pairs of terminals (solar panel, battery, load) for wires up to 25mm. Maximum solar panel voltage 150V. Maximum solar panel power 520W (12V) / 1040W (24V).

Temperature sensor for automatic compensation (-3mV/C/2V). Working temperature: -35C to +55C. Size: 30.2 x 18.2 x 6.3 cm. Multiple mounting holes for ease of installation.

This controller comes with a detailed user manual (advanced users will benefit from a section explaining MPPT technology). (tick the box "This is not about an item" if you don't know this item number).

We accept Pay Pal, cheques, credit and debit cards, and bank transfer payments. Upon receipt of the item, please examine it carefully. To enable us to deal with the courier efficiently, we may ask for some additional details, e. Photographs of the damage and packaging. Please ensure that we receive the item in its brand new, original condition, i.

Take reasonable care to wrap and protect it on the way back to us. Photonic Universe Ltd is a company based in London, United Kingdom. We design and supply solar and wind renewable energy products and complete off-grid power systems for various applications, to both trade and retail customers. Tens of thousands of clients all over the world rely on our products to generate clean energy for their households, vehicles, boats and remote places with no access to mains electricity. From our customers who have been impressed by the high quality of our products and excellent service.

We are VAT registered in the UK and can provide VAT receipts upon request. The item "High efficiency 40A MPPT solar charge controller for 12V/ 24V systems up to 150V" is in sale since Friday, July 21, 2017. This item is in the category "Home, Furniture & DIY\DIY Materials\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits".

The seller is "photonic_universe" and is located in London. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

  • MPN: TR4215BN
  • Brand: Photonic Universe
  • Subtype: Photovoltaic


High efficiency 40A MPPT solar charge controller for 12V/ 24V systems up to 150V   High efficiency 40A MPPT solar charge controller for 12V/ 24V systems up to 150V