Controller Control System

PowMr MPPT 60A Solar Charge Controller 12V 48V Regulator Systems up to 160V

PowMr MPPT 60A Solar Charge Controller 12V 48V Regulator Systems up to 160V
PowMr MPPT 60A Solar Charge Controller 12V 48V Regulator Systems up to 160V
PowMr MPPT 60A Solar Charge Controller 12V 48V Regulator Systems up to 160V
PowMr MPPT 60A Solar Charge Controller 12V 48V Regulator Systems up to 160V
PowMr MPPT 60A Solar Charge Controller 12V 48V Regulator Systems up to 160V
PowMr MPPT 60A Solar Charge Controller 12V 48V Regulator Systems up to 160V
PowMr MPPT 60A Solar Charge Controller 12V 48V Regulator Systems up to 160V
PowMr MPPT 60A Solar Charge Controller 12V 48V Regulator Systems up to 160V
PowMr MPPT 60A Solar Charge Controller 12V 48V Regulator Systems up to 160V
PowMr MPPT 60A Solar Charge Controller 12V 48V Regulator Systems up to 160V
PowMr MPPT 60A Solar Charge Controller 12V 48V Regulator Systems up to 160V
PowMr MPPT 60A Solar Charge Controller 12V 48V Regulator Systems up to 160V

PowMr MPPT 60A Solar Charge Controller 12V 48V Regulator Systems up to 160V    PowMr MPPT 60A Solar Charge Controller 12V 48V Regulator Systems up to 160V
100% MPPT 60A solar charge controller Intelligent, Max efficiency =98.1%, PV utilization =99%. Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller. Fit for USERcan be set Lithium, Lifepo4, Li(NiCoMn)O2/Vented/Flooded/Sealed/Gel/NiCd battery.

User programmable for absorption voltage/Floating voltage/Low voltage disconnect. Blacklight LCD Dispaly PV voltage/output power/Battery voltage/charging current/working mode/Temperature, ? TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters. The maximum PV input voltage (Voc): DC160V The controller cannot work with this voltage of long duration, which will interrupt the controller.

See input voltage from PV. The output connector is for lamps only (12V system less 60W, 24V / 36V / 48V system less than 100W) and will be burned when connected to other loads. The output for battery is not reverse polarity protection.

Always connect the battery first!!! Make sure that the battery voltage is sufficient for the controller to recognize the correct system voltage.

The dismantling sequence contradicts the wiring sequence. Do not connect an inverter / wind / generator or charger to the controller, please connect the inverter to the battery side. Make sure that the solar input voltage exceeds 3V or more than the battery voltage and the total input power is the max. The charging current is almost zero when the controller is trickle charging.

MPPT Maximum power point tracking automatically. 3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge. 12V system (DC9V-DC15V) 24V system (DC18V-DC29V). 36V system (DC30V-DC39V) 48V system (DC40VDC60V). Dynamic response and recovery time.

=98.1% (Voc is 1.5 or 2 times than battery, then it's best efficiency). Voc from PV Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 or 2 times than battery, then it's best efficiency.

12V system (DC20VDC80V) 24V system (DC37VDC105V). 36V system (DC50VDC160V) 48V system (DC72VDC160V). The maximum PV input voltage (Voc).

DC190VThe controller can't work at this voltage of long duration that will break controller. Please refer to Input voltage from PV. The maximum PV input power. The total power rated of PV can't be over this watt that will break the controller.

Selectable battery type(default is Sealed). Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user). Refer to Batteries charging reference.

12V system (15V) 24V system (30V) 36V system (45V) 48V system (60V). 14.2V-(Max temperature-25 centi-degree)0.3. Output power will reduce when it's more 70 centi-degree. Output power will be normal when it's less 55 centi-degree.

Imported materials, Accord to EU standards, Industrial grade range. Meet 2002/95/EC; No cadmium, hydrides and fluorides. According to EN61000, EN55022, EN55024. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem.

This item is in the category "Home, Furniture & DIY\DIY Materials\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits".solar-eu" and is located in this country: GB. This item can be shipped to United Kingdom.

  • The maximum PV input voltage (Voc): 160V
  • Selectable battery type(default is Seale: Vented/ Sealed / Gel / NiCd / Lithium battery
  • Rated output current: 60A
  • Automatic temperature compensation: 14.2V-(Max temperature-25 centi-degree)*0.3
  • Temperature Protection: 75 centi-degree
  • Overcharging protection voltage: 36V system (45V) 48V system (60V)
  • System voltage automatic recognition: 36V system (DC30V-DC39V) 48V system (DC40V~DC60V)
  • Voc from PV: 36V system (DC50V~DC160V) 48V system (DC72V~DC160
  • Resistance Properties: Heat Pressure Resistant
  • Recommended Environment: Indoor/Outdoor
  • Colour: Green
  • Type: Solar Panel Kit
  • System Configuration: Hybrid
  • Wattage: 700-799 W
  • Features: Flexible
  • Application: Home/Garden
  • Current Rating: 60A
  • Pliability: Flexible
  • Product Line: HHJ
  • Unit Type: Unit
  • Material: Alloy
  • Protection Properties: Surge Protection
  • Current Output: 60A
  • Power Source: Solar
  • Current Type: DC
  • Voltage: 12V/24V/36V/48V
  • Brand: PowMr
  • Model: HHJ-60A
  • Charging Mode: MPPT (Maximum Power Point Tracking)
  • Power: 701-800 W
  • Unit Quantity: As your choice
  • Solar Technology: All


PowMr MPPT 60A Solar Charge Controller 12V 48V Regulator Systems up to 160V    PowMr MPPT 60A Solar Charge Controller 12V 48V Regulator Systems up to 160V