The LINX4 is a 4-way dynamic universal controller which is capable of switching all types of load applications including resistive, inductive and capacitive. The primary purpose is to switch Redtronic lighting and audible products.The LINX4 consists of 4 independently controlled outputs one with a high current switching output of 10A and three with a maximum of switching of 6A per output and an overall limit across the 4 outputs of 15A. The outputs are monitored and if overcurrent is detected the outputs are immediately switched off. A fault will be indicated with 3 flashes and 3 beeps. The output cannot be re-enabled until the LINX4 has been power cycled. The end user has the ability to place legends on the keys to indicate what the output does. There is also an ability to change the activation colour and mode of the switches (the default is red and latching). This allows the end user to customise the LINX4 to fit their needs. Dynamic hierarchy switch selection (parent & child configurable). Easy user configurable latching or momentary functions. Over current monitor and deactivation feature (3 flashes & beeps).
12 & 24 volt operation minimum working voltage (DC) 8v / maximum working voltage (DC) 30v. Length 76mm (2.63") x Width 54mm (2.12") x Depth 22mm (0.86). Switch 1 - 10amp (max) Switches 2,3,4 -6amp (max) Overall limit 15amps. User configurable'activation' switch colour (Red, amber, green, blue & white). 3000mm rear cable (8 x power and switched output cable).
3000mm switch/output cable (power, earth, switches 1,2,3,4) (6 core). Overall overcurrent monitoring across the 6 outputs.
The item "Redtronic LINX4 Universal Beacon Control System Like Whelen MicroLink" is in sale since Friday, October 1, 2021. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Lighting & Bulbs\Accessory Lighting\Emergency & Warning Lights".
The seller is "mawsley-evs" and is located in Kettering. This item can be shipped worldwide.