Name:12V/24V 400W/800W Waterproof Wind And Light Hybrid Controller. Application:Wind Power Photovoltaic Controller.
Rated Power of Wind Turbine: 400W/800W. Lock Voltage of Wind Turbine: 14.5V/29V. Recovery Voltage of Wind Turbine:13.2V/26.4V. Rated Power of Solar Power: 500W/1000W. Reliability: Intelligent, modular design, simple structure, powerful functions; Industrial grade high-quality components and strict manufacturing techniques, which is suitable for relatively harsh working environments such as low temperature. It also has reliable performance and long service life. Firstly, connect the positive pole of the load, battery, and solar panel to the red line of the controller. Then connect to the load's yellow wire of the negative pole. Then connect the negative pole of the battery to the black line of the controller.Connect the negative pole of the solar panel to the blue line of the controller. Connect the three-phase AC voltage input line of the controller to the three-phase voltage output line (green line) of the wind turbine.
After the entire connection is completed, please wrap the connectors with waterproof tape to avoid water ingress. Battery capacity, discharging indicator (Light on indicates the battery condition). Solar charging indicator (Light on indicates charging). Controller power-on indicator (Light on indicates the battery is connected properly). Brake, fault, overcharge, protection (Light on indicates warning condition).
Fan charging indicator (Light on indicates the fan is working). 1X Wind And Light Hybrid Controller. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Please allow slight manual measurement deviation for the data. Also, the each additional item means.
The the same color and size. Transit time may be a little delayed because of the.If you have any questions.