Supports automatic operation including dry running and single-step running, CNC lathe controller's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control. Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs 3. Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A 4. You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation 5.
With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc. And it also supports program editing, reading, deleting and saving. Newly developed motion controller uses a high-performance 32-bit CPU, the driving equipment uses a subdivided stepper motor or servo motor, equipped with a liquid crystal display, a completely enclosed touch operation keyboard, while the system has high reliability, high precision, low noise and simple operation. Item Type: CNC lathe controller Model: CM35L-10 System Composition: Control System Mainly Composed of Following Parts: High-performance, high-speed 32-bit CPU LCD monitor (Resolution: 192 x 64) Special motion control chip (Signal Output: 5V pulse + direction) Input / output (14 photoelectric isolation 24V input, 8 photoelectric isolation 24V output, single channel rated 500mA) Maximum Program Line: 480 lines Contact key array (28 keys) System Indicators: Minimum Data Unit: 0.001mm Maximum Data Size: ± 99999.999mm Fast Motion speed Limit: 9000mm / min (when pulse equivalent is 0.001mm) Maximum Processing speed Limit: 9000mm / min (when pulse equivalent is 0.001mm) Maximum Pulse Output Frequency: 150KHz Control Shaft Number: 1-4 axis (X, Y, Z, C) Linked Shafts Number: X, Y, Z, C axis can be linearly interpolated, X, Y can be circularly interpolated Electronic Gear: Numerator: 1-99999, Denominator: 1-99999 System Main Functions: Automatic, manual, program, parameter, self-check, setting, etc.Optional Style: Single-axis / Biaxial / Tri- axis / 4-axis (optional). Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country's. We will reply your message within 48 hours.
If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better.
We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Stepper Controls & Drives".
The seller is "binggoshop" and is located in this country: CN. This item can be shipped worldwide.