Standalone Door Entry Control System RFID Card Tag Reader Keypad Bolt Lock Kit. The door access system comes with RFID card keypad reader, DC 12V 3A power supply and waterproof token key ring, they are widely used for entrances and exits at offices, factories, hotels, home... 1 x RFID card reader keypad.
Doesn't need to connect on the computer or control board, it can work alone. It supports EM only, not support special encrypted cards such as HID, Cobra, APCiK.. Wire connection please refer to RFID reader and power supply manual. Contactless RFID transponder technology with power off data protection function.
Support offline work and full programming from the keypad. Support card, password, card+password to open door. Support master cards to add or delete user cards.
Support the switch for opening the door. Elegant appearance with clear numbers, convient to use.Support: Card, PIN, card + PIN. Valid password: General 1 set. Size: 120 x 78 x 22mm (4.72 x 3.07 x 0.86 inch).
Weight: 123g (0.27 lb). Power supply switch is built-in EMI filter. 100% full load burn-in test. Low output ripple and noise. Over load/over voltage/short circuit protection.Based delay control circuit, lock time can be in 0 to 15 seconds. Set NC / NO output, can control various types of electric locks. Can reduce the load of access controller, save wiring to reduce the hidden trouble. Input voltage: AC 110V to 240V, 50Hz to 60Hz.
Output voltage: DC 12V, 3A. Output contact: Access Control, Electric Lock, Release Button. Time relay: 0 to 15sec. Standard design: Steel material, Painted.Size: 120 x 95 x 38mm (4.72 x 3.74 x 1.49 inch). Weight: 326g (0.72 lb). This electric bolt lock is made from durable and high aluminium alloy material, durable for use. Lock while supplied with power, and unlock without power. Sensitively and response quickly, low operational and standby current.
With no external interference, making it more stable and safer. Suitable for wooden door, metal door. Delay: 0/ 3/ 6 second. Size: 150 x 34 x 28mm (5.9 x 13.4 x 1.1 inch).Weight: 454g (1.0 lb). Speaker for door bell, must use with door system with door bell function. Power input is 12V, Red for positive, Black for negative. Green and Yellow wire connect to Bell connector on door system. Bell ring is "Ding Dong" twice. Size: 65 x 90 x 25cm (2.36 x 3.54 x 0.98 inch). User friendly, push for openning the door. Compatible with most access control/ locking devices. Size: 85 x 85mm (3.34 x 3.34 inch).
Weight: 54g (1.90 oz). Compatible with all door entry system to gain access. Size: 36 x 26 x 6.6mm (1.41 x 1.02 x 0.26 inch). Weight: 10 x 7.7g, 77g (0.17 lb). We do not provide pick-up service.We are a team of enthusiastic computer DIYer, love to build PC but have different problem same as yours. Heart is pain if missing a cable when installing a drive, or you need HDD case for M key SSD, but you bought B key. DIRECT is a channel for you to choose the right parts, and smoothly assemble computer. Let's empower your PC today. This item is in the category "Home, Furniture & DIY\Home Security\Door Entry Systems & Intercoms".
direct_uk" and is located in this country: CN. This item can be shipped worldwide.