Or to ring-based gimbals with the optional Nucleus-M Hand Grip Universal Gimbal Ring Adapters. Each motor has its own built-in motor drive that communicates directly with the hand unit and hand grips. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the motors and hand unit/hand grips to the same channel and you will have full control. The motors allow for automatic calibration of the lens as well as manual calibration if you are using lenses that dont have hard end stops at close focus and infinity.
The motors are designed to clamp onto 19mm. (with the included rod bushings). This clamp-on design allows you to easily attach and detach the motors without needing to remove any other accessory from your setup. Every motor has a 0.8 mod, 35 tooth, 32 pitch gear attached, which is the standard gear size for cinema lenses. The torque of the Nucleus-M Motor at 14.8V is 2.5N·m.
To power the motors, only one power port on your camera rig needs to be used. Simply plug the P-tap power cable into one of the motors and then daisy chain power to the rest of the motors with the short 7-pin to 7-pin cables.
The motors can be powered through a power source that has a voltage output ranging from 7.2V-24V. The hand unit and hand grips are each powered with two 18650 rechargeable batteries. When fully charged, the batteries in the hand grips last up to 2 days, while in the hand unit they last up to 10 hours. Remote start/stop is possible by plugging a compatible Nucleus-M R/S cable into the open 7-pin port of a motor.
This then gives you R/S capabilities through the hand unit and/or the handles. Package included: (1) Wireless FIZ hand unit (1) Brushless wireless motor with 19mm rod support and 15mm rod bushings (1) Photographic Lens Follow Focus Adapter (1) 74cm 7-pin to P-tap motor power cable (1) Follow focus marking disks (1) Wireless FIZ hand unit strap (1) 18650 quad battery charger. These charges are the buyers responsibility. USA , Canada, Australia, Switzerland, New Zealand, Singapore, Japan etc. For some countries like Russia, Brazil, Hungary, Kazakhstan, etc. Please kindly provide relevant photos and videos for checking and approval. We do not have responsibility to response on item lost during returning.We will do our best to solve any problem and provide you with the best customer services. The item "Tilta WLC-T03-K1 Wireless Lens Control System NUCLEUS-M KIT 1" is in sale since Tuesday, December 17, 2019. This item is in the category "Cameras & Photo\Camera, Drone & Photo Accessories\Other Camera & Photo Accs". The seller is "fiuscamshop" and is located in shenzhen.
This item can be shipped worldwide.